Overview

This page will guide you through how to successfully complete our Photo Collection.

Please note for this assignment you will capture shelves, displays, and coolers that have Redbull products. Please refer back to the project instructions in your app to verify the type of visit you will be completing. 

Directory:

• Objective
• Locating & Capturing Products
• What to Capture
• Steps to follow
• Final Product

Objective

For this visit, you will be taking photos of all shelves, displays, and coolers where Redbull is present. Please follow the instructions carefully so your visit can be approved.

Many of the photos you submit will be stitched together. This means the photos must have a certain amount of overlap. The correct amount of overlap is about 1-3 products. Here's a link to a full explanation. In order to have the best outcome, please watch this short video, and follow our best practices outlined here. 

What to Capture

During this visit, you will proceed with the restocking shelves, capture photos and merchandise shelves, displays, and coolers that have Red Bull products. Below are some examples:

• Endcap displays
• Floor displays
• Branded shippers
• Any additional displays you might find
• You will also record inventory on shelves and in the backroom

Here are more example pictures:

Backroom Examples:

Steps to follow:

Your objective is to putting products on shelves (restocking) and take pictures of all the products in an aisle before and after.

Take a picture of the back room where the product is usually placed.

Check the back room for products (locate an employee who can let you into the backroom/assist with finding the products in the back

Restocking the coolers is the main priority. Coolers may be located in the open-air cold vault. Take pictures before and after merchandising.

Final Product

At the end of the visit, you should putting products on shelves and captured images of Red Bull on the aisles, displays, and coolers.